TEMCo Hydraulic Knockout Punch Driver Only 9 US Ton 3/4"-16 Thread

TEMCo ID: SP0036 Hydraulic unit provides true 9 US ton hydraulic punching force. Same hydraulic unit that is included with TH0004 KO sets Max KO is 2" conduit size Compatible with GREENLEE and other domestic punch tooling, draw studs or arbors that use...

Crimping Head Die Holder for TEMCo TH0005 / TH0400 Hydraulic Crimper Tool

TEMCo ID: SP0020 Type: Direct replacement head for your TH0005 / TH0400 model lug crimper  Designed for 10 Gauge through 600 MCM   Includes sliding pin Material: Black oxide  Warranty: 5 Years ⚠️ This product can expose...

Spring for TEMCo TH3030 Conduit Offset Bender

TEMCo ID: SP0236 ype: Direct replacement spring for your TH3030 Conduit Offset bender  Spring measures 1.99" in length   OD - 0.613" ID - 0.450"  Warranty: 5 Years ⚠️ This product can expose you to chemicals which are...

TH0006 single size Die set for wire size 2/0 AWG

Hydraulic Crimper Die Crimping Size: 2/0 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals only.) Single size die for the TEMCo TH0006 Battery...

1 inch Conduit Punch and Die For Hydraulic Knock Out Driver 3/4 inch-16 Thread

Our punch dies are sized to conduit sizes, not actual hole sizes. Electricians use these sizes because conduits are measured by the inner diameter of the tube, not their outer diameter. That means, for example, a 1" punch die will correctly punch for a...

1/2" Female NPT Thread 1/2" Body Female Hydraulic Coupler ISO 16028 Flat Face Quick Connect

TEMCo's flat face hydraulic couplers use the ISO 16028 standard, which replaces older ag coupler standards that result in hydraulic oil spillage and added debris in your hydraulic system. Our couplers are machined out of carbon steel and plated with Zinc...

Cylinder Ram Head for TEMCo TH0037 Hydraulic Knockout Punch Driver

TEMCo ID: SP0010 Type: Cylinder Ram Head for TEMCo TH0037 Hydraulic Knockout Punch Driver Punching Thickness Capacity: 1/8 inch (11 ga) Steel, 1/16 inch Stainless Steel  Cylinder measures 6" in height Threads on cylinder are 3/4-16...

TEMCo THA113 2-1/2" Deep Draw Conduit Punch - Die for Hydraulic Knock Out Driver

Deep Draw Conduit Punch for Fitting Size: 2-1/2" Required Punching Force: 13 US TonsActual Hole Size: 2.908"Fits Draw Stud Size: 3/4" -16 (TEMCo THA0001 and THA100 draw studs)  Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless...

TEMCo THA109 1" Slug Splitting Conduit Punch - Die for Hydraulic Knock Out Driver

Slug Splitting Conduit Punch for Fitting Size: 1" Required Punching Force: 9 US TonsActual Hole Size: 1.33"Fits Draw Stud Size: 3/4" -16 (TEMCo THA0001 and THA100 draw studs)  Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16"...

Cable Stripper Bushing for 600-700MCM CU / 750MCM AL THHN or XHHW Cable THA078

TEMCo Rotary Cable Stripper Bushing for 600 to 700MCM CU or 750MCM AL THHN / XHHW Cable Designed for use with the TEMCo TH0410 Cable stripper kit This bushing is for 600 to 700MCM copper or 750MCM aluminum wire with THHX or XHHW insulation. Each...

TEMCo THA002 Conversion Draw Stud found in TH0360 and TH0372 KO Sets

Replacement THA002 draw stud that is found in the TH0360 and TH0372 KO sets Thread is M20x1.5 to 3/4"-16 with an internal thread of 3/8"-24 Length is 5-13/16" Designed for Metric thread hydraulic drivers that want to use English thread KO punch and...

Tool ONLY from the TEMCo V2.0 TH0005 hydraulic crimper

TEMCo ID: SP0259 Tool ONLY from the TEMCo V2.0 TH0005 hydraulic crimper set   Unit comes filled with oil, fully tested and ready to use Black oxide coated head to prevent wear and corrosion Crimping dies sold separately  ⚠️ This...

Cable Stripper Bushing for 4/0 CU THHN or XHHW Cable THA064

TEMCo Rotary Cable Stripper Bushing for 4/0 CU THHN / XHHW  Designed for use with the TEMCo TH0410 Cable stripper kit This bushing is for 4/0 copper wire with THHX or XHHW insulation. Each bushing has adjustable depth for changing insulation...

3-1/2 inch Conduit Punch and Die For Hydraulic Knock Out Driver 3/4 inch-16 Thread

Our punch dies are sized to conduit sizes, not actual hole sizes. Electricians use these sizes because conduits are measured by the inner diameter of the tube, not their outer diameter. That means, for example, a 1" punch die will correctly punch for a...

(HF0079 + HF0080) 3/8" NPT Thread 3/8" Body Pair Hydraulic Coupler ISO 14540 Ball Valve Quick Connect Also

We've taken the time to coat the male poppet end with Titanium Nitride (Ti-Ni). Persistent coupling and decoupling along with inevitable particulates getting between the couplers leads to scratches and abrasions. These inconsistencies will eventually...

TH0393-1" Conduit hole size Knockout punch unit with manual draw stud – (1.36" – Actual Hole Size)

   ⚠️ This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

1 1/8'' Demo Hammer Hex Shank T Post Driver Attachment

3/4" Female SAE Thread 1/2" Body Male Hydraulic Coupler ISO 16028 Flat Face Quick Connect

We've taken the time to coat the male poppet end with Titanium Nitride (Ti-Ni). Persistent coupling and decoupling along with inevitable particulates getting between the couplers leads to scratches and abrasions. These inconsistencies will eventually...

Seal kit for TEMCo TH0023 Toe Jack (Pre February 2020 model)

TEMCo ID: SP0080 This seal kit is for TH0023 jacks manufactured in February 2020 and before. Verify by checking S/N on jack. Black reservoir seal is square edge and t-shaped Instructions will be included with each seal kit. ⚠️ This product can expose...

Pull pin for TEMCo TH3030 Conduit Offset Bender

TEMCo ID: SP0235 Type: Direct replacement retainer pin for your TH3030 Conduit Offset bender  Pin measures 3" long, 0.3135" diameter   Pull ring is 1.18" diameter  Warranty: 5 Years ⚠️ This product can expose you to...

TH0005 single size Die set for wire size 8 AWG

Hydraulic Crimper Die Crimping Size: 8 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals only.) Single size die for the TEMCo TH0005 Battery Lug...

English Draw Stud 3/4-16" Thread for TEMCo TH0304 Punch Set

  Direct replacement English draw stud for TEMCo TH0304 punch Length is 5.19 in Thread of the draw stud is 3/4-16" Does not include the knurled nut   ⚠️ This product can expose you to chemicals which are known to the State of...

TEMCo THA014 Long English Draw Stud found in TH0370 and TH0388 Dimple Die Sets

Replacement THA014 draw stud that is found in the TH0370 and TH0388 Dimple Die sets Thread is 3/4"-16 with an internal thread of 3/8"-24 Length is 6-1/16" ⚠️ This product can expose you to chemicals which are known to the State of California to cause...

Foot Pedal with Contacts for TEMCo HP0006 Electric Hydraulic Power Pack Pump

TEMCo ID: SP0210 Direct replacement foot switch for your TEMCo HP0006 Electric Powered Hydraulic Pump Cord is 6 feet long Will also work with TEMCo HP0003 pump but you will need to reuse your cord Warranty: 5 Years ⚠️ This product can expose...