TEMCo Industrial

TH0307 Square 92mm x 92mm 1/4 DIN Panel Meter Punch Dies 3.622" x 3.622"

Square DIN Punch Die Set for 92mm x 92 mm (1/4 DIN) Fits TEMCo Industrial, Greenlee and other English punch sets (3/4-16") OR Fits other import metric punch sets (20 x 1.5mm). Draw studs and...

TH0382 Dimple Die for 1/2” Conduit Hole Size - 0.86” Actual Hole Size

Dimple Die for 1/2” Conduit Hole Size - 0.86” Actual Hole Size Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13. This dimple die set creates flared holes. Cut out...

TH0383 Dimple Die for 3/4” Conduit Hole Size - 1.05” Actual Hole Size

Dimple Die for 3/4” Conduit Hole Size - 1.05” Actual Hole Size Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13. This dimple die set creates flared holes. Cut out...

TH0384 Dimple Die for 1” Conduit Hole Size - 1.33” Actual Hole Size

Dimple Die for 1” Conduit Hole Size - 1.33” Actual Hole Size Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13. This dimple die set creates flared holes. Cut out...

TH0385 Dimple Die for 1-1/4” Conduit Hole Size – 1.69” Actual Hole Size

Dimple Die for 1-1/4” Conduit Hole Size – 1.69” Actual Hole Size Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13. This dimple die set creates flared holes...

TH0387 Dimple Die for 2” Conduit Hole Size – 2.36” Actual Hole Size

Dimple Die for 2” Conduit Hole Size – 2.36” Actual Hole Size Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13. This dimple die set creates flared holes. Cut...

TH0388 Dimple Die Set Tool Kit 6pcs for Conduit Knockout Sizes: (1/2") 0.86", (3/4") 1.05", (1”) 1.33", (1-1/4") 1.69", (1-1/2") 1.93", (2") 2.36"

⚠️ This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca...

TH0390 – Manual Knockout Punch Driver Kit for ½ inch to 2 inch Electrical Conduit Hole Sizes (1/2"-2" Conduit Size)

Manual drive knockout punches, for use with ratchet, wrench, or electric driver. Conduit punch sizes: 1/2",3/4",1",1-1/4, 1-1/2", 2" Capacity: Mild steel plate through 10 gauge (3.5mm) Works to...

TH0391-1/2" Conduit hole size Knockout punch unit with manual draw stud – (0.86" – Actual Hole Size)

  ⚠️ This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www...

TH0392-3/4" Conduit hole size Knockout punch unit with manual draw stud – (1.11" – Actual Hole Size)

TH0393-1" Conduit hole size Knockout punch unit with manual draw stud – (1.36" – Actual Hole Size)

   ⚠️ This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www...

TH0394-1 1/4" Conduit hole size Knockout punch unit & manual draw stud – (1.70" – Actual Hole Size)

   ⚠️ This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www...

TH0395-1 1/2" Conduit hole size Knockout punch unit & manual draw stud – (1.95" – Actual Hole Size)

   ⚠️ This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www...

TH0396-2" Conduit hole size Knockout punch unit with manual draw stud – (2.42" – Actual Hole Size)

   ⚠️ This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www...

TH0397 – Manual Knockout Punch Driver Kit for ½ inch to 1-1/4” inch Electrical Conduit Hole Sizes (1/2"- 1-1/4" Conduit size)

Manual drive knockout punches, for use with ratchet, wrench, or electric driver. Conduit punch sizes: 1/2",3/4",1",1-1/4 Capacity: Mild steel plate through 10 gauge (3.5mm) Works to punch Mild...

TH0400 single size Die set for cable size #10 - 5/32" Thick Wall

Hydraulic Crimper Die Crimping Size: #10 - 5/32" Thick Wall For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and...

TH0400 single size Die set for cable size #16 - 3/16" Thin Wall

Hydraulic Crimper Die Crimping Size: #16 - 3/16" Thin Wall For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and...

TH0400 single size Die set for cable size #25 - 3/16"

Hydraulic Crimper Die Crimping Size: #25 - 3/16" For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum...

TH0400 single size Die set for cable size #35 - 1/4"

Hydraulic Crimper Die Crimping Size: #35 - 1/4" For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum...

TH0400 single size Die set for cable size #4 - 1/16" - 3/32"

Hydraulic Crimper Die Crimping Size: #4 - 1/16" - 3/32" For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and...

TH0400 single size Die set for cable size #6 - 3/32" - 1/8"

Hydraulic Crimper Die Crimping Size: #6 - 3/32" - 1/8" For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and...

TH0400 single size Die set for cable size #8 - 1/8" - 5/32"

Hydraulic Crimper Die Crimping Size: #8 - 1/8" - 5/32" For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and...

TH0410 TEMCo Rotary Cable Stripper Kit for THHN/XHHW 6 Gauge to 750 MCM (Compatible with any drill)

TEMCo Rotary Cable Stripper Kit for THHN / XHHW 6 Gauge to 750 MCM (Compatible with any drill) Cable Stripper will strip THHN / XHHW cable from 6 gauge to 750 MCM with varying insulation thickness...

TH1818 Hydraulic Dieless Lug Crimper Tool 10AWG to 400MCM

SPECIFICATIONS:   TEMCo Part Number: TH1818 Type: Dieless Hydraulic Crimper Crimping Range: 10AWG to 400MCM Crimping Force: 5 US Tons Material: Black oxide crimp head & dies For Use With:...