Long English Knock Out Punch Draw Stud 3/4"-16 Thread

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and any other critical specifications are the ones you'll...

Long Metric Knock Out Punch Draw Stud M20 x 1.5mm Thread

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and any other critical specifications are the ones you'll...

Short Metric Knock Out Punch Draw Stud M20 x 1.5mm Thread

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and any other critical specifications are the ones you'll...

Small English Knock Out Punch Draw Stud 3/8"-24 Thread + nut

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and any other critical specifications are the ones you'll...

Small Metric Knock Out Punch Draw Stud M10 x 1mm Thread + nut

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and any other critical specifications are the ones you'll...

Step Down Draw Stud 3/4"-16 x 10mm Nut Included

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and any other critical specifications are the ones you'll...

TEMCo THA002 Conversion Draw Stud found in TH0360 and TH0372 KO Sets

Replacement THA002 draw stud that is found in the TH0360 and TH0372 KO sets Thread is M20x1.5 to 3/4"-16 with an internal thread of 3/8"-24 Length is 5-13/16" Designed for Metric thread hydraulic drivers that want to use English thread KO punch and...

TEMCo THA014 Long English Draw Stud found in TH0370 and TH0388 Dimple Die Sets

Replacement THA014 draw stud that is found in the TH0370 and TH0388 Dimple Die sets Thread is 3/4"-16 with an internal thread of 3/8"-24 Length is 6-1/16"

TEMCo THA016 Long Conversion Draw Stud found in TH0370 and TH0388 Dimple Die Sets

Replacement THA016 draw stud that is found in the TH0370 and TH0388 Dimple Die sets Thread is M20x1.5 to 3/4"-16 with an internal thread of 3/8"-24 Length is 6-1/16" Designed for Metric thread hydraulic drivers that want to use English thread KO punch...

TH0391-1/2" Conduit hole size Knockout punch unit with manual draw stud – (0.86" – Actual Hole Size)

THA100 Long English Knock Out Punch Draw Stud 3/4"-16 Thread

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and any other critical specifications are the ones you'll...