Short Metric Knock Out Punch Draw Stud M20 x 1.5mm Thread

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and any other critical specifications are the ones you'll need.

We've seen our fair share of bent draw studs, especially when customers are rushing through hundreds of conduit holes, nibble a bit off center and bam, bent draw stud. It happens, and our warranty covers that. While you're waiting for a replacement, having one or two of these as back ups ensures you don't miss a minute of your tight deadline to get those enclosures out, finishing that Christmas gift, or whatever awesome and cool projects our talented customers are working on.

We're constantly improving our products, and our hydraulic knockout punches have gone through a few iterations over the years. As such, if you purchased a hydraulic knockout punch set from us a before a certain time, you're going to need a specific draw stud. Check out our quick flow chart guide in the image gallery for selection help.

Draw Stud Selection Guide

We're constantly improving our products, and our hydraulic knockout punches have gone through a few iterations over the years. As such, if you purchased a hydraulic knockout punch set from us a before a certain time, you're going to need a specific draw stud. Here's a quick guide to help.