10, 12, and 14 AWG crimping range. For use with solar connectors and MC4 connector terminals.
Crimp-force and indication cycle completion are controlled by a mechanism that will not release the terminal until adequate pressure has been applied. The system additionally features a jaw release override for the instance of mistaken wire placement or a defective terminal. Dies included for MC-4 Solar Connectors handle 14, 12 and 10 GA wires (2.5, 4 or 6 mm squared).
- Black oxide Crimp Head & Dies won't chip or flake.
- Designed for rugged daily use.
- 5 Year Warranty from an American name. NON-GENERIC.
- In-stock, ready to ship. Get it fast in 1 to 7 days.
- Designed exclusively for solar connectors.
- Designed for 14, 12, and 10 Gauge.
- Terminal support frame ensures proper wire depth penetration and alignment.
- Produces perfect, solid crimp terminations every time.
- Foolproof crimp depth mechanism ensures uniform terminations before releasing clamping action.
- Crimping Action:
- Manual
- Cuts Wire:
- No
- Strips Wire:
- No
- Crimping Range:
- 10, 12, and 14 AWG
- Terminal Type:
- MC4
- For use With:
- Solar connectors, MC4 connector terminal
1. Contract of Sale
TEMCo Ð Tower Electric Motor Company (hereinafter called ÒSellerÓ) agrees to sell, and buyer agrees to purchase, the equipment described in this Proposal/[Confirmation][Invoice] pursuant to these terms and conditions, which shall constitute the entire contract of sale between buyer and seller. These terms and conditions supersede and take precedence over any and all terms, including, but not limited to, any contrary terms, in any documents (such as purchase orders) submitted by buyer to seller.2. Orders
Orders are subject to acceptance at home office of Seller.3. 5 Year Warranty
Equipment distributed by TEMCo is warranted to be free from defects in material and workmanship under normal use, service, and indoor storage. This warranty is limited to repair, replacement, or issuing of credit, as Seller may elect and at SellerÕs distribution center, of such parts as shall appear to Seller, upon inspection, to have been defective in material or workmanship, but does not include any installation, labor, or transportation costs. When the equipement reaches its final destination, the buyer must promptly notify the carrier of any damage, should the case arise. Otherwise, the buyer shall have no recourse against TEMCo. TEMCo inspects parts returned for warranty claim for misapplication. Misuse of equipment will void this warranty. TEMCo shall in no event be liable for any special or conse-quential charges for replacing or installation of warranty parts. 4. Limitation of Remedies and Damages The 5 Year Warranty set forth in Section 3 above is in lieu of any and all other express and/or implied warranties. All other warranties, both express and/or implied, including but not limited to implied warranties of performance, merchantability or fitness for a particular purpose are expressly disclaimed and denied. Except for the remedy set forth in Section 3 above, Seller shall not be liable to buyer or any third party under this contract, or for anything in any manner relating to or arising out of the subject matter of this contract, for any loss of business or profits or for any general, direct, indirect, special, consequential, exemplary, punitive, incidental or other damages, loss or expenses, even if Seller has been advised of the possibility of such damages, loss or expense. Seller is not responsible for any consequence of the use or application of the products by the buyer. Buyer shall indemnify and hold Seller, and its officers, directors, employees and agents harmless against any and all losses, claims, damages, judgments, liabilities, costs and expenses (including attorneysÕ fees and expenses) arising out of or in any way related to the use of SellerÕs products by buyer and/or any third party.5. Shipping
Seller shall not be responsible for any default or delay in shipping due to contingencies beyond its control, or the control of its suppliers, which prevents or interferes with Seller making delivery on the date specified, including but not limited to wars, or restraints affecting shipping, delivery of materials or credit as a result of strikes, lockouts, fires, floods, or any other contingency affecting the seller or its suppliers. The Seller shall have the right to cancel a contract of sale or to extend the shipping date in the event that any such contingencies prevent or delay shipments. Seller shall not be liable for any losses incurred by late delivery of equipment. All equipment will be suitably packed for domestic shipment and are not suitable for long term storage. DELAYS In the event Buyer causes Seller to delay shipping or start up of equipment under this proposal, any additional costs incurred by the Seller shall be reimbursed by the Buyer. Seller shall not be responsible for delays in delivery caused by acts of God, government rulings, strikes, accidents, delays or default of SellerÕs suppliers, delays caused by acts of the Buyer, or other causes outside of SellerÕs reasonable control.6. Cancellation
Orders are not sujbect to cancellations or change in specifications, shipping schedules or other conditions originally agreed upon without SellerÕs written consent, and then only upon agreement to compensate Seller for expenses incurred by such cancellation or changes.7. Taxes
Any excise tax, sales tax, other taxes, or duty of any nature arising out of or assessed against equipment or orders shall be the sole and exclusive responsibility of buyer and shall be added to the prices quoted or invoiced and shall in all circumstances be paid by the buyer.8. Insurance and Risk of Loss
The equipment distributed by TEMCo shall at all times after delivery to buyer, buyerÕs agent or transportation company, whichever occurs first, be the sole responsibility of the buyer, and all loss or damage to said equipment or any part thereof shall be borne by the buyer (even if Seller has arranged for transportation), unless otherwise agreed in writing.9. Venue
Any and all disputes, claims, or causes of action arising out of or in any way relating to any equipment distributed by TEMCo must be brought in the Circuit Court for the Tenth Judicial Circuit, Alameda County, California.10. Exceptions
Anything not specificically quoted above in lieu of any specification.1 Review
-
Th0011 solar crimped tool
It gives one the best crimps that I have ever seen a good crimper ever do. It is solid crimp not one of those that you see through on the sides. I would recommend this crimper to anyone that does electrical work.. thank you for a real good tool
