TEMCo THA109 1" Slug Splitting Conduit Punch - Die for Hydraulic Knock Out Driver

Slug Splitting Conduit Punch for Fitting Size: 1" Required Punching Force: 9 US TonsActual Hole Size: 1.33"Fits Draw Stud Size: 3/4" -16 (TEMCo THA0001 and THA100 draw studs)  Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16"...

1 1/8'' Demo Hammer Hex Shank T Post Driver Attachment

3/4" Female SAE Thread 1/2" Body Male Hydraulic Coupler ISO 16028 Flat Face Quick Connect

We've taken the time to coat the male poppet end with Titanium Nitride (Ti-Ni). Persistent coupling and decoupling along with inevitable particulates getting between the couplers leads to scratches and abrasions. These inconsistencies will eventually...

Pull pin for TEMCo TH3030 Conduit Offset Bender

TEMCo ID: SP0235 Type: Direct replacement retainer pin for your TH3030 Conduit Offset bender  Pin measures 3" long, 0.3135" diameter   Pull ring is 1.18" diameter  Warranty: 5 Years ⚠️ This product can expose you to...

TH0006 single size Die set for wire size 2/0+ AWG

Hydraulic Crimper Die Crimping Size: 2/0+ AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals only.) Single size die for the TEMCo TH0006 Battery...

TH0005 single size Die set for wire size 8 AWG

Hydraulic Crimper Die Crimping Size: 8 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals only.) Single size die for the TEMCo TH0005 Battery Lug...

Cable Stripper Bushing for 4/0 CU THHN or XHHW Cable THA064

TEMCo Rotary Cable Stripper Bushing for 4/0 CU THHN / XHHW  Designed for use with the TEMCo TH0410 Cable stripper kit This bushing is for 4/0 copper wire with THHX or XHHW insulation. Each bushing has adjustable depth for changing insulation...

3-1/2 inch Conduit Punch and Die For Hydraulic Knock Out Driver 3/4 inch-16 Thread

Our punch dies are sized to conduit sizes, not actual hole sizes. Electricians use these sizes because conduits are measured by the inner diameter of the tube, not their outer diameter. That means, for example, a 1" punch die will correctly punch for a...

TEMCo Hydraulic Knockout Punch Driver Only 9 US Ton 3/4"-16 Thread

TEMCo ID: SP0036 Hydraulic unit provides true 9 US ton hydraulic punching force. Same hydraulic unit that is included with TH0004 KO sets Max KO is 2" conduit size Compatible with GREENLEE and other domestic punch tooling, draw studs or arbors that use...

Crimping Head Die Holder for TEMCo TH0005 / TH0400 Hydraulic Crimper Tool

TEMCo ID: SP0020 Type: Direct replacement head for your TH0005 / TH0400 model lug crimper  Designed for 10 Gauge through 600 MCM   Includes sliding pin Material: Black oxide  Warranty: 5 Years ⚠️ This product can expose...

TH0006 single size Die set for wire size 2/0 AWG

Hydraulic Crimper Die Crimping Size: 2/0 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals only.) Single size die for the TEMCo TH0006 Battery...

3/4" Female NPT Thread 3/4" Body Female Hydraulic Coupler ISO 7241B Ball Valve Quick Connect

Our couplers are machined out of carbon steel and plated with Zinc Nickel (Zn-Ni), which offers corrosion resistance, as well as an extra layer against normal wear and tear. Each coupler is pressure tested with hydraulic oil right off the factory line. ...

3/4" Female NPT Thread 3/4" Body Male Hydraulic Coupler ISO 7241B Ball Valve Quick Connect

We've taken the time to coat the male poppet end with Titanium Nitride (Ti-Ni). Persistent coupling and decoupling along with inevitable particulates getting between the couplers leads to scratches and abrasions. These inconsistencies will eventually...

(HF0046 + HF0047) 3/8" Female NPT Thread 3/8" Body Pair Hydraulic Coupler ISO 16028 Flat Face Quick Connect

We've taken the time to coat the male poppet end with Titanium Nitride (Ti-Ni). Persistent coupling and decoupling along with inevitable particulates getting between the couplers leads to scratches and abrasions. These inconsistencies will eventually...

Cylinder Ram Head for TEMCo TH0037 Hydraulic Knockout Punch Driver

TEMCo ID: SP0010 Type: Cylinder Ram Head for TEMCo TH0037 Hydraulic Knockout Punch Driver Punching Thickness Capacity: 1/8 inch (11 ga) Steel, 1/16 inch Stainless Steel  Cylinder measures 6" in height Threads on cylinder are 3/4-16...

TH0393-1" Conduit hole size Knockout punch unit with manual draw stud – (1.36" – Actual Hole Size)

   ⚠️ This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Cylinder Ram Head (4.25" height) for TEMCo TH0004 Hydraulic Knockout Punch Driver

TEMCo ID: SP0031 Cylinder Ram Head (4.25" height) for TEMCo TH0004 Hydraulic Knockout Punch Driver 9 US Ton Cylinder measures 4.25" in height. See P/N SP0030 for 3.5" height cylinder Threads on cylinder are 3/4-16. Threads for hydraulic hose are 1/4"...

TH0005 single size Die set for wire size 4 AWG

Hydraulic Crimper Die Crimping Size: 4 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals only.) Single size die for the TEMCo TH0005 Battery Lug...

Seal Kit for TEMCo Hydraulic Cylinder HC0028

TEMCo ID: SP0063 Direct replacement seal kit for your TEMCo cylinder model HC0028 Includes o-rings (black color) and gaskets (white color) Make sure to cut the white nylon gasket diagonally and lubricate it and the seal before replacing them. ⚠️ This...

TH0006 single size Die set for wire size 1/0 AWG

Hydraulic Crimper Die Crimping Size: 1/0 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals only.) Single size die for the TEMCo TH0006 Battery...

TH0006 single size Die set for wire size 6 AWG

Hydraulic Crimper Die Crimping Size: 6 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals only.) Single size die for the TEMCo TH0006 Battery Lug...

TH0005 single size Die set for wire size 10 AWG

Hydraulic Crimper Die Crimping Size: 10 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals only.) Single size die for the TEMCo TH0005...

Cable Stripper Bushing for 300MCM CU / 350MCM AL THHN or XHHW Cable THA068

TEMCo Rotary Cable Stripper Bushing for 300MCM CU or 350MCM AL THHN / XHHW  Designed for use with the TEMCo TH0410 Cable stripper kit This bushing is for 300MCM copper or 350MCM aluminum wire with THHX or XHHW insulation. Each bushing has...

3 inch Conduit Punch and Die For Hydraulic Knock Out Driver M20x1.5mm Thread

Our punch dies are sized to conduit sizes, not actual hole sizes. Electricians use these sizes because conduits are measured by the inner diameter of the tube, not their outer diameter. That means, for example, a 1" punch die will correctly punch for a...