TEMCo THA109 1" Slug Splitting Conduit Punch - Die for Hydraulic Knock Out Driver

Slug Splitting Conduit Punch for Fitting Size: 1" Required Punching Force: 9 US TonsActual Hole Size: 1.33"Fits Draw Stud Size: 3/4" -16 (TEMCo THA0001 and THA100 draw studs)  Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16"...

TEMCO THA107 1/2" Slug Splitting Conduit Punch - Die for Hydraulic Knock Out Driver

Slug Splitting Conduit Punch for Fitting Size: 1/2" Required Punching Force: 9 US TonsActual Hole Size: 0.86"Fits Draw Stud Size: TEMCo THA012, THA013, THA015 or any draw stud with a diameter of 0.430" (10.90mm)  Punching...

3-1/2 inch Conduit Punch and Die For Hydraulic Knock Out Driver 3/4 inch-16 Thread

Our punch dies are sized to conduit sizes, not actual hole sizes. Electricians use these sizes because conduits are measured by the inner diameter of the tube, not their outer diameter. That means, for example, a 1" punch die will correctly punch for a...

TEMCo THA113 2-1/2" Deep Draw Conduit Punch - Die for Hydraulic Knock Out Driver

Deep Draw Conduit Punch for Fitting Size: 2-1/2" Required Punching Force: 13 US TonsActual Hole Size: 3"Fits Draw Stud Size: 3/4" -16 (TEMCo THA0001 and THA100 draw studs)  Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel...

3/4" Female NPT Thread 3/4" Body Female Hydraulic Coupler ISO 7241B Ball Valve Quick Connect

Our couplers are machined out of carbon steel and plated with Zinc Nickel (Zn-Ni), which offers corrosion resistance, as well as an extra layer against normal wear and tear. Each coupler is pressure tested with hydraulic oil right off the factory line. ...

3/4" Female NPT Thread 3/4" Body Male Hydraulic Coupler ISO 7241B Ball Valve Quick Connect

We've taken the time to coat the male poppet end with Titanium Nitride (Ti-Ni). Persistent coupling and decoupling along with inevitable particulates getting between the couplers leads to scratches and abrasions. These inconsistencies will eventually...

(HF0046 + HF0047) 3/8" Female NPT Thread 3/8" Body Pair Hydraulic Coupler ISO 16028 Flat Face Quick Connect

We've taken the time to coat the male poppet end with Titanium Nitride (Ti-Ni). Persistent coupling and decoupling along with inevitable particulates getting between the couplers leads to scratches and abrasions. These inconsistencies will eventually...

Hydraulic Cylinder Ram Single Acting 200 TON 2" Inch Stroke

TEMCo Industrial's hydraulic cylinders come with an ISO 14540 coupler, which means you're compatible with a large majority of other products out on the market. Don't deal with the headache of mismatched fittings and confusing coupler specifications -...

TH0006 single size Die set for wire size 2/0 AWG

Hydraulic Crimper Die Crimping Size: 2/0 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals only.) Single size die for the TEMCo TH0006 Battery...

Hydraulic Hose for TEMCo TH0004 Hydraulic Knockout Punch Driver

TEMCo ID: SP0032 Type: Direct replacement hydraulic hose for your TEMCo model TH0004 Knockout set One side of the hose has a swivel fitting, the other end is fixed AW32 hydraulic oil is recommended (not included) Hose is approximately 34 inches...

Hydraulic Hose for TEMCo TH0037 Hydraulic Knockout Punch Driver

TEMCo ID: SP0011 Type: Direct replacement hydraulic hose for your TEMCo model TH0037 Knockout set One side of the hose has a swivel fitting, the other end is fixed AW32 hydraulic oil is recommended (not included) Hose is approximately 61 inches...

TH0006 single size Die set for wire size 2/0+ AWG

Hydraulic Crimper Die Crimping Size: 2/0+ AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals only.) Single size die for the TEMCo TH0006 Battery...

TH0005 single size Die set for wire size 8 AWG

Hydraulic Crimper Die Crimping Size: 8 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals only.) Single size die for the TEMCo TH0005 Battery Lug...

Seal Kit for TEMCo TH0005 Hydraulic Crimper Tool

TEMCo ID: SP0021 Direct replacement seal kit for your TEMCo crimper model TH0005 Includes both the piston seal and gasket, along with the plunger seal and gasket. Instructions will be included with each seal kit.

Crimping Head Die Holder for TEMCo TH0005 Hydraulic Crimper Tool

TEMCo ID: SP0020 Type: Direct replacement head for your TH0005 model lug crimper  Designed for 10 Gauge through 600 MCM   Includes sliding pin Material: Black oxide  Warranty: 5 Years

(HF0064 + HF0065) 3/8" Female NPT Thread 3/8" Body Pair Hydraulic Coupler ISO 7241B Ball Valve Quick Connect

We've taken the time to coat the male poppet end with Titanium Nitride (Ti-Ni). Persistent coupling and decoupling along with inevitable particulates getting between the couplers leads to scratches and abrasions. These inconsistencies will eventually...

Short Metric Knock Out Punch Draw Stud M20 x 1.5mm Thread

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and any other critical specifications are the ones you'll...

Pair of Plastic Latches for TEMCo TH0004/TH0037 Knockout Case

TEMCo ID: SP0033 Direct replacement latches for your TEMCo TH0004 or TH0037 KO sets Snap in place Includes two latches Warranty: 5 Years

Cylinder Ram Head (4.25" height) for TEMCo TH0004 Hydraulic Knockout Punch Driver

TEMCo ID: SP0031 Cylinder Ram Head (4.25" height) for TEMCo TH0004 Hydraulic Knockout Punch Driver 9 US Ton Cylinder measures 4.25" in height. See P/N SP0030 for 3.5" height cylinder Threads on cylinder are 3/4-16. Threads for hydraulic hose are 1/4"...

Cylinder Ram Head for TEMCo TH0037 Hydraulic Knockout Punch Driver

TEMCo ID: SP0010 Type: Cylinder Ram Head for TEMCo TH0037 Hydraulic Knockout Punch Driver Punching Thickness Capacity: 1/8 inch (11 ga) Steel, 1/16 inch Stainless Steel  Cylinder measures 6" in height Threads on cylinder are 3/4-16...

Cable Stripper Bushing for 4/0 CU THHN or XHHW Cable THA064

TEMCo Rotary Cable Stripper Bushing for 4/0 CU THHN / XHHW  Designed for use with the TEMCo TH0410 Cable stripper kit This bushing is for 4/0 copper wire with THHX or XHHW insulation. Each bushing has adjustable depth for changing insulation...

TH0393-1" Conduit hole size Knockout punch unit with manual draw stud – (1.36" – Actual Hole Size)

3 inch Conduit Punch and Die For Hydraulic Knock Out Driver M20x1.5mm Thread

Our punch dies are sized to conduit sizes, not actual hole sizes. Electricians use these sizes because conduits are measured by the inner diameter of the tube, not their outer diameter. That means, for example, a 1" punch die will correctly punch for a...

TEMCo THA002 Conversion Draw Stud found in TH0360 and TH0372 KO Sets

Replacement THA002 draw stud that is found in the TH0360 and TH0372 KO sets Thread is M20x1.5 to 3/4"-16 with an internal thread of 3/8"-24 Length is 5-13/16" Designed for Metric thread hydraulic drivers that want to use English thread KO punch and...