TH0393-1" Conduit hole size Knockout punch unit with manual draw stud – (1.36" – Actual Hole Size)

1 1/8'' Demo Hammer Hex Shank T Post Driver Attachment

3/4" Female SAE Thread 1/2" Body Male Hydraulic Coupler ISO 16028 Flat Face Quick Connect

We've taken the time to coat the male poppet end with Titanium Nitride (Ti-Ni). Persistent coupling and decoupling along with inevitable particulates getting between the couplers leads to scratches...

English Draw Stud 3/4-16" Thread for TEMCo TH0304 Punch Set

  Direct replacement English draw stud for TEMCo TH0304 punch Length is 5.19 in Thread of the draw stud is 3/4-16" Does not include the k

Pull pin for TEMCo TH3030 Conduit Offset Bender

TEMCo ID: SP0235 Type: Direct replacement retainer pin for your TH3030 Conduit Offset bender  Pin measures 3" long, 0.3135" diameter  

TH0005 single size Die set for wire size 8 AWG

Hydraulic Crimper Die Crimping Size: 8 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals

TH0006 single size Die set for wire size 1/0 AWG

Hydraulic Crimper Die Crimping Size: 1/0 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum termina

TH0005 single size Die set for wire size 4/0 AWG

Hydraulic Crimper Die Crimping Size: 4/0 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum termina

TH0005 single size Die set for wire size 4 AWG

Hydraulic Crimper Die Crimping Size: 4 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals

2 inch Conduit Punch and Die For Hydraulic Knock Out Driver M20x1.5mm Thread

Our punch dies are sized to conduit sizes, not actual hole sizes. Electricians use these sizes because conduits are measured by the inner diameter of the tube, not their outer diameter. That means,...

3/4" Female NPT Thread 3/4" Body Female Hydraulic Coupler ISO 7241B Ball Valve Quick Connect

Our couplers are machined out of carbon steel and plated with Zinc Nickel (Zn-Ni), which offers corrosion resistance, as well as an extra layer against normal wear and tear. Each coupler is pressure...

3/4" Female NPT Thread 3/4" Body Male Hydraulic Coupler ISO 7241B Ball Valve Quick Connect

We've taken the time to coat the male poppet end with Titanium Nitride (Ti-Ni). Persistent coupling and decoupling along with inevitable particulates getting between the couplers leads to scratches...

(HF0046 + HF0047) 3/8" Female NPT Thread 3/8" Body Pair Hydraulic Coupler ISO 16028 Flat Face Quick Connect

We've taken the time to coat the male poppet end with Titanium Nitride (Ti-Ni). Persistent coupling and decoupling along with inevitable particulates getting between the couplers leads to scratches...

Short Metric Knock Out Punch Draw Stud M20 x 1.5mm Thread

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and...

Hydraulic Hose 5 FT for TEMCo HP0004, HP0005, HP0006 Pump 10,000 PSI

  Features

Hydraulic Hose 5 FT for TEMCo HP0000 Pump 10,000 PSI

  Features

Seal kit for TEMCo TH0026 Toe Jack (Pre March 2020 model)

TEMCo ID: SP0084

TH0005 single size Die set for wire size 2/0 AWG

Hydraulic Crimper Die Crimping Size: 2/0 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum termina

2-1/2 inch Conduit Punch and Die For Hydraulic Knock Out Driver M20x1.5mm Thread

Our punch dies are sized to conduit sizes, not actual hole sizes. Electricians use these sizes because conduits are measured by the inner diameter of the tube, not their outer diameter. That means,...

Pair of magnets for TEMCo TH0006 or TH1818 Hydraulic Crimper Tool

TEMCo ID: SP0002 Type: Replacement magnets for TEMCo TH0006 or TH1818 Hydraulic Crimper   2 magnets included. One goes in piston side, the other goes in the crimper head (TH0

Jack Toe for TEMCo TH0023 Hydraulic Toe Jack (5-10 Ton)

TEMCo ID: SP0088

TH0006 single size Die set for wire size 6 AWG

Hydraulic Crimper Die Crimping Size: 6 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals

TH0005 single size Die set for wire size 4/0+ AWG

Hydraulic Crimper Die Crimping Size: 4/0+ AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum termin

TH0005 single size Die set for wire size 10 AWG

Hydraulic Crimper Die Crimping Size: 10 AWG For Use With: Battery cable and welding cable, building wiring, and crimp terminal lugs, including heavy cast lugs (for copper and aluminum terminals onl