TH0005 V2.0 Hydraulic Cable Lug Crimper (11 US TON) 10 AWG to 600 MCM Electrical Terminal Cable Wire Tool Kit with 32 Die Sets

  16 Standard Sizes in AWG Conforms to DIN industrial terminal size standard. Compatible with all US domestic market terminals, including color coded lugs. True-Hex Crimp Applies even pressure on all sides creating sharp edges and high...

Hydraulic Cable Lug Crimper TH0006 V2.0 5 US TON 12 AWG to 00 (2/0) Electrical Terminal Cable Wire Tool Kit with 18 Die Sets

9 Standard size dies for American Wire Gauge 12 through 2/0 (00). Dies conform to DIN industrial standards and are compatible with all US domestic market terminals, including color coded lugs. Dies imprint the size into the crimped terminal for code...

TEMCo Hammer Lug Crimper Tool - Crimps 8 AWG to 4/0 Battery/Welding Cables (Workbench-Mountable)

Our hammer crimpers are build to last with a 5 Year Warranty and 1 Year return policy. Guaranteed, no questions asked. Produces perfect, solid crimp terminations every time. Black oxide crimp ram won't chip or flake. Use with all crimp terminal lugs,...

TEMCo TH0001 12" 4/0 AWG ELECTRICAL WIRE & CABLE CUTTER

The TEMCo TH0001 Wire & Cable Cutter can cut wire up to 4/0 (0000 AWG). Features 12 inch steel handles with rubber grips and forged carbon steel blades. For use with battery and welding cable, building wire, SO Cord, and more. This cutter is a...

Long English Knock Out Punch Draw Stud 3/4"-16 Thread

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and any other critical specifications are the ones you'll...

Dieless Indent Lug Crimping Tool 10 AWG to 400 MCM DIELESS Indent

For Battery & welder cables, building wiring, and more. The Indent Crimping Method eliminates the need to select (guess) die size. Many factors affect die selection; wire stranding type, lug wall thickness & fitment etc. This indent crimper...

Dieless Indent Lug Crimping Tool 8 AWG to 0000 AWG(4/0)

The Indent Crimping Method eliminates the need to select (guess) die size. Many factors affect die selection; wire stranding type, lug wall thickness & fitment etc. This indent crimper takes out the guess work with non incremental knob adjustment...

TH1818 Hydraulic Dieless Lug Crimper Tool 10AWG to 400MCM

SPECIFICATIONS:   TEMCo Part Number: TH1818 Type: Dieless Hydraulic Crimper Crimping Range: 10AWG to 400MCM Crimping Force: 5 US Tons Material: Black oxide crimp head & dies For Use With: All battery and welding cable, building wiring, crimp...

THA100 Long English Knock Out Punch Draw Stud 3/4"-16 Thread

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and any other critical specifications are the ones you'll...

TH0410 TEMCo Rotary Cable Stripper Kit for THHN/XHHW 6 Gauge to 750 MCM (Compatible with any drill)

TEMCo Rotary Cable Stripper Kit for THHN / XHHW 6 Gauge to 750 MCM (Compatible with any drill) Cable Stripper will strip THHN / XHHW cable from 6 gauge to 750 MCM with varying insulation thickness. Wire stripper can be used with any drill or cordless...

Step Down Draw Stud 3/4"-16 x 10mm Nut Included

This draw stud is used for our TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set you might be using. Just make sure the thread sizes, length, and any other critical specifications are the ones you'll...

Hydraulic Cylinder Ram Single Acting 20 TON 6" Inch Stroke

TEMCo Industrial's hydraulic cylinders come with an ISO 14540 coupler, which means you're compatible with a large majority of other products out on the market. Don't deal with the headache of mismatched fittings and confusing coupler specifications -...

TH0390 – Manual Knockout Punch Driver Kit for ½ inch to 2 inch Electrical Conduit Hole Sizes (1/2"-2" Conduit Size)

Manual drive knockout punches, for use with ratchet, wrench, or electric driver. Conduit punch sizes: 1/2",3/4",1",1-1/4, 1-1/2", 2" Capacity: Mild steel plate through 10 gauge (3.5mm) Works to punch Mild steel, Brass, Copper, Aluminum (soft alloys...

Hydraulic Cylinder Ram Single Acting 50 TON 2" Inch Stroke

TEMCo Industrial's hydraulic cylinders come with an ISO 14540 coupler, which means you're compatible with a large majority of other products out on the market. Don't deal with the headache of mismatched fittings and confusing coupler specifications -...

3/4" Bore SDS MAX Ground Rod Driver

Saves time and gurantee easy installation of ground rods. ⚠️ This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca...

Hydraulic Crimping Tool for Stainless Steel Cable Railing Fittings – 11 US Tons - 1/16" to 1/4" Cable Fitting Compatibility

Step 1 Install the die set that matches your terminal size. Step 2 Close the release valve by rotating to the right (clockwise). Step 3 Pump the handle until the resistance felt becomes significant or the dies bottom out. Step 4 Open the...

TH0392-3/4" Conduit hole size Knockout punch unit with manual draw stud – (1.11" – Actual Hole Size)

TEMCo TH0035 Ratcheting Cable Cutter - Cuts up to 500 MCM (240mm²)

The TEMCo TH0035 ratcheting cable cutter can cut wire up to 500 MCM (240mm²). This cutter is a non-insulated tool. Do NOT use on live conductors. Wear eye protection during use. For use with Copper & Aluminum electrical wire only (such as...

TEMCo TH4001 Conduit Heat Blanket Bender 1/2" - 1 1/2" PVC

TEMCo TH4001 Conduit Heat Blanket Bender 1/2" - 1 1/2" PVC Easily bend 1/2" - 1½" PVC conduit with TEMCo's TH4001 heat blanket!  TEMCo’s heat blanket works by heating the wrapped area on the conduit, making the conduit flexible and...

TEMCo Hydraulic Knockout Punch Driver Electrical Conduit Hole KO Tool 3/4"-16

Hydraulic unit provides true 13 US ton hydraulic punching force. Compatible with GREENLEE and other domestic punch tooling, draw studs or arbors that use 3/4-16 thread size Hydraulic unit is the same unit used for TEMCo TH0037 Knockout Punch. ⚠️...

TH0396-2" Conduit hole size Knockout punch unit with manual draw stud – (2.42" – Actual Hole Size)

   ⚠️ This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Hollow Hydraulic Cylinder Ram 20 TON 2 Inch Stroke

TEMCo Industrial's hydraulic cylinders come with an ISO 14540 coupler, which means you're compatible with a large majority of other products out on the market. Don't deal with the headache of mismatched fittings and confusing coupler specifications -...

Hydraulic Cylinder Ram Single Acting 10 TON 2" Inch Stroke

TEMCo Industrial's hydraulic cylinders come with an ISO 14540 coupler, which means you're compatible with a large majority of other products out on the market. Don't deal with the headache of mismatched fittings and confusing coupler specifications -...

Cable Stripper Bushing for 1AWG THHN or XHHW Cable THA059

TEMCo Rotary Cable Stripper Bushing for 1AWG THHN / XHHW CU or AL Designed for use with the TEMCo TH0410 Cable stripper kit This bushing is for 1AWG copper or aluminum wire with THHX or XHHW insulation. Each bushing has adjustable depth for changing...