Single Phase Isolation Transformer Selection Guide

Single Phase Isolation Transformer Selection Guide

TEMCo Single Phase Isolation Transformers are 50/60 Hz rated and come in a NEMA 3R enclosure for indoor use as well as outdoor protection against rain and sleet. Our transformers are built to last, guaranteed. That's why we back these with a decade long warranty.

Specifications

• 50/60 Hz
• NEMA 3R
• 150°C rise
• UL Listed and CSA Certified
• 10 Year Warranty

TEMCO 1 Phase Isolation Transformer

How to Select a Transformer

Selecting the right voltage transformer is simple. Review the following considerations to determine the best fit for your application. Then, select a transformer from one of the tables below.

Input Voltage

Select a transformer that will operate on the supply voltage available at your facility (Example: 120V, 240V, or 480V). To ensure compatibility, check the wiring diagram by clicking a part number and viewing its product page.

Frequency

All the transformers in this section are rated for both 50 and 60 Hz, for use worldwide.

Windings

Copper wound models cost more than the equivalent aluminum wound versions. The primary advantage of copper is its superior corrosion resistance. Copper wound transformers are commonly used for corrosive or high humidity environments like marine applications, and when cost is not a factor.

kVA or Amp Output

Select a transformer with kVA based on your load requirements. It is fine to oversize significantly, but never to undersize for your load. For motor loads, do not exceed 60% of the maximum capacity of the transformer, because electric motors have start up requirements significantly higher than their running requirements.


Product Selection

The chart shows all of our available single phase isolation transformer configurations. First, find the primary voltage you need. Then, click on the primary voltage you need to view the full product selection of secondary voltage configurations.

Transformer sizes offered from 3 to 330 kVA.


Photo Gallery